High mechanical resistance for ceramic placing.

CECOIS ESPECIAL FACHADAS

¡Compártelo o guárdalo!

CECOIS ESPECIAL FACHADAS , HIGH MECHANICAL RESISTANCE FOR CERAMIC PLACING.

CECOIS ESPECIAL FACHADAS

HIGH MECHANICAL RESISTANCE FOR CERAMIC PLACING.

Description High mechanical resistance for ceramic placing., CECOIS ESPECIAL FACHADAS ?

Glue cement that mixed with water in the right moment of using, is a great adhesive for applying ceramic, glazed tiles, etc coatings on facades. Available colours: white and grey. Prices according the volume of the order.

Aplication High mechanical resistance for ceramic placing.?

CECOIS ESPECIAL FACHADAS can be used as an adhesive for coating with ceramic pieces on facades, courtyards, diving walls, back walls and with bricks, slabs, marble, pieces made of glass, slate, roof tile, stone, etc. In addition, roofs, pools, tanks, etc.
Its special polymeric and additives content confer a very high mechanical resistance, great capacity for support the small expansions of the pieces and a very high adherences in low-absorption pieces for pavements too.

Features and Benefits de CECOIS ESPECIAL FACHADAS , High mechanical resistance for ceramic placing.

  •  EXCELLENT ADHERENCE POWER
  •   VERY GOOD RESISTANCE IN INDOORS AND OUTDOORS
  •   VERY GOOD WORKABLE
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface must be clean, free of greases, compact, without scalin and slaightly mostened.

Modes of application High mechanical resistance for ceramic placing.?

 Mixed directly with water in the recommended proportion until getting the desire consistency. -The mix can be done manually or with an low-revolution electric mixer (400-5000rpm). -Mixture proportions are 7 litres of water by 25 kgs sacks. -Once the mixture is done let it rest from 3 to 5 minutes before using.
 CECOIS ESPECIAL FACHADAS is spreaded with a toothed trowel spreading the quantity suitable to support coating on the opened product time (20 minutes deppending the temperature, the more temperature more time can be opened). -Placing the pieces pressing them in order to the adhesive become smooth and all the contact surface can be covered for it. -For pices bigger than 30x30 cm is recommended the double-glue, it means, applying the adhesive on the piece and on the support too.
 When the weather is very hot or when the support is very absorbent is recommended to moisten sligntly before applying. -On pieces placing ourdoor expasion joints must be foreseen by the expansion.

Clean up

With a lot of clean water while the material keeps fresh.

Performance High mechanical resistance for ceramic placing.

3 kgs by sqm on 2mm layer.

Storage High mechanical resistance for ceramic placing.

2 years in their original sacks, well closed, no exposing to extrem temperatures, saved of weatherness and in open-air and dry places.

Documentation High mechanical resistance for ceramic placing.

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.