Plastic resin to improve mortars and concretes.

AGLUTAIS 30-50 NORMAL

¡Compártelo o guárdalo!

AGLUTAIS 30-50 NORMAL, PLASTIC RESIN TO IMPROVE MORTARS AND CONCRETES.

AGLUTAIS 30-50 NORMAL

PLASTIC RESIN TO IMPROVE MORTARS AND CONCRETES.

OTRAS VARIANTES DE AGLUTAIS 30-50 :

RÁPIDO

Description Plastic resin to improve mortars and concretes., AGLUTAIS 30-50 NORMAL?

Thixotropic emulsion based on synthetic resins that when they are added directly with mortars and concretes masses, confers an increase of physical and chemical resistances and also reduces the setting time. It must added slowly with mortar until get the proper thickness. It avoids the cracking of renders. It is stable in wet environments. It´s anticorrosive and reduces the dust formation.

Aplication Plastic resin to improve mortars and concretes.?

Aglutais 30-50 it's used to improve cohesion, compressive and flexural mechanical resistance, adhesion,reduces plastic shrinkage etc.
It's used in any sand and cement mortars to which this properties want to be improved.

Features and Benefits de AGLUTAIS 30-50 NORMAL, Plastic resin to improve mortars and concretes.

  •  
  •   MORE RESISTANT MORTARS
  •   IMPERMEABILITY IMPROVEMENT
  •   MECHANICAL RESISTANCE IMPROVEMENT
  •   CHEMICAL RESISTANCE IMPROVEMENT
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Not applicable

Modes of application Plastic resin to improve mortars and concretes.?

  AGLUTAIS 30-50 is ready for use and is hard applied. - It replaces mixing water. - It must be added slowly to water until the required consistency is achieved. - The mortar must beallowed to cure, mainly in hot weather and during the first 72 hours, by means of a curing film or by wetting it periodically.

Clean up

With plentiful clean water.

Performance Plastic resin to improve mortars and concretes.

In mortars 26 l by 100 kg of cement.

Storage Plastic resin to improve mortars and concretes.

Three years, in their original packaging, tightly closed, without exposing to extreme temperatures, protected from the weather and in dry and ventilated places.

Documentation Plastic resin to improve mortars and concretes.

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.