Powder which mixed with water resists direct fire

REFRACMOR STANDARD

¡Compártelo o guárdalo!

REFRACMOR STANDARD, POWDER WHICH MIXED WITH WATER RESISTS DIRECT FIRE

REFRACMOR STANDARD

POWDER WHICH MIXED WITH WATER RESISTS DIRECT FIRE

OTRAS VARIANTES DE REFRACMOR :

SUPER

Description Powder which mixed with water resists direct fire, REFRACMOR STANDARD?

Refractory powder mortar in grey colour which mixed with water and curing reduces the heat transfer and resist the direct fire. Excellent coating on ovens´combustion chambers, boilers, chimneys, etc. And for placing refranctory brick. It is also has high resistance to compression. Grey colour.

Aplication Powder which mixed with water resists direct fire?

In refractory bricklaying for lifting smokestacks, barbecues, ovens. For coating combustion chambers, boilers, smokestacks...etc. Plasters in high temperature ambients.

Features and Benefits de REFRACMOR STANDARD, Powder which mixed with water resists direct fire

  •   HIGH TEMPERATURE RESISTANT
  •   EASY TO APPLY
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Must be clean, no grease, oil, dust or loose particles, presenting compact, dry or slightly wet.

Modes of application Powder which mixed with water resists direct fire?

  Mix REFRACMOR SUPER with water in a clean container in the proportion of 100/22 in weight respectively until reaching the desired consistency.
  Mix briskly by preferably using an electric drill or mixer. - Apply the paste in the same way as a normal mortar using a trowel, small trowel, etc.

Clean up

With plentiful clean water

Performance Powder which mixed with water resists direct fire

1,5 kg per sqm in layer of 1 mm.

Storage Powder which mixed with water resists direct fire

2 years, in their original bags tightly closed, protected from the weather and in dry and ventilated places.

Documentation Powder which mixed with water resists direct fire

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.