Waterproofing plastified pvc sheet with fiberglass felt reinforcement.

LASTOIS PVC SG-FV

¡Compártelo o guárdalo!

LASTOIS PVC SG-FV, WATERPROOFING PLASTIFIED PVC SHEET WITH FIBERGLASS FELT REINFORCEMENT.

LASTOIS PVC SG-FV

WATERPROOFING PLASTIFIED PVC SHEET WITH FIBERGLASS FELT REINFORCEMENT.

COMPRAR Ficha Técnica

OTRAS VARIANTES DE LASTOIS PVC :

SA-FVL

SH

SV-MP

Description Waterproofing plastified pvc sheet with fiberglass felt reinforcement., LASTOIS PVC SG-FV?

PVC sheet in grey colour. Plastified for waterproofing works. It is not compatible with bitumen, tars, solvent or oil. Suitable for waterproofing terraces and trafficable and non-trafficable decks. Suitable for applying in outdoor and indoor. Rollers of 1,78x20 m and 1,2 mm of thickness.

Aplication Waterproofing plastified pvc sheet with fiberglass felt reinforcement.?

For waterproofing decks without ballast. For waterproofing perimeter areas exposed to the weather. High puncture resistance areas.

Features and Benefits de LASTOIS PVC SG-FV, Waterproofing plastified pvc sheet with fiberglass felt reinforcement.

  •   HIGH DIMENSIONAL STABILITY
  •   HIGH TENSILE STRENGTH
  •   HIGH PUNCTURE RESISTANCE
  •   GOOD RESISTANCE TO MICROORGANISM, ROOT, MECHANICAL IMPACTS
  •   WEATHER
  •   U.V. RADIATION
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The support must be firm, smooth, clean and dry and free of loose particles. Staggered joints must be placed in case of thermal insulation sheets without spaces between sheets bigger than 1 mm.

Modes of application Waterproofing plastified pvc sheet with fiberglass felt reinforcement.?

  Before spreading the sheet the colaminated profiles must be fixed mechanically both in horizontal and vertical partitions. In vertical plane the profile must be fixed 20 cm minimum over flooring surface. A sheet strip must be welded to the paritition wall and it must be overlapped and welded on the membrane in horizontal plane. It is recommended to use colaminated profiles with the suitable size according the placement position. - The profile must be sealed properly with LASTOIS POL polyurethane putty. - The sheets must be welded on the colaminated supports in order to hide profiles fixings. - The loose membrane must be placed on the support and in perperdicular direction to the line of maximum slope. - Welding between sheets is made by hot-air-blowtorch. The overlaps should have at least 5 cm between them. - In order to verity the weldings a physical test will be done using a metallic needle passing it along the joint. - More than 3 sheets in just one point must not be joined. - A geotextile-sheet of PUNZONAIS must be used if expansions that can damage the sheet are foreseen. - Polyurethane foam application must be avoided directly on the waterproofing work. - In case of refurbishments chemical incompatibilities with old waterproofing based on bitumen sheets and modified bitumen-based mastic must be taking into account and even may be necessary their removal. - Particular attention must be paid to singular points.

Clean up

Not necessary.

Performance Waterproofing plastified pvc sheet with fiberglass felt reinforcement.

1 sqm per sqm

Storage Waterproofing plastified pvc sheet with fiberglass felt reinforcement.

Stored in cool and dry place. Rolls must be in parallel, never crossed and in their original package.

Documentation Waterproofing plastified pvc sheet with fiberglass felt reinforcement.

+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.