Flexible layer with high adherence for levelling of surfaces.

LASTOIS FLEX

¡Compártelo o guárdalo!

LASTOIS FLEX , FLEXIBLE LAYER WITH HIGH ADHERENCE FOR LEVELLING OF SURFACES.

LASTOIS FLEX

FLEXIBLE LAYER WITH HIGH ADHERENCE FOR LEVELLING OF SURFACES.

COMPRAR Ficha Técnica

Description Flexible layer with high adherence for levelling of surfaces., LASTOIS FLEX ?

Lastois Flex is a product based on elastomers that is in paste shape and ready to use. Lastois Flex is used as levelling layer on surfaces such as glazzed, ceramic, monolayer products, cement and lime based mortars, etc

Aplication Flexible layer with high adherence for levelling of surfaces.?

LASTOIS FLEX is used for levelling porous or glazzed supports on facades such as glass, ceramic, monolayer, mortars based on cement or lime, etc. LASTOIS FLEX has high adherence to support so primers are not required.

Features and Benefits de LASTOIS FLEX , Flexible layer with high adherence for levelling of surfaces.

  •  HIGH ADHERENCE
  •   FLEXIBLE
  •   EASE OF APPLYING
  •   COVER SMALL STATIC FISSURES
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface must be clean, free of dust, dry and without cracks or fissures.

Modes of application Flexible layer with high adherence for levelling of surfaces.?

 The product must be well homegenized, manually or by a low revolution electric mixer (300-500 rpm). - Apply one layer of LASTOIS FLEX by stainless steel trowel with a thickness of 1 mm aprox. - With this first layer a tissue of fiberglass TEJIAIS 5 must be placed. The fiberglass tissue must be placed into the LASTOISFLEX layer. - Another layer of LASTOIS FLEX must be applied when the first one is completely dry. - Once the last one hardens a polystirene sponge in order to smooth it, according with the required to apply the rendering. - To apply the rendering (such as soft renderings as RELAIS, GRAIS, REVIDECOR, etc,) LASTOIS FLEX layer must be completely dry. - Before the applycation of LASTOIS FLEX all the mansory works such as cracks and fissures reparation must be done and also the smooth irregularities higher than 5 mm if it is neccesary. - The support must be completely dry before applying the product because although it isn´t a vapour barrier it hampers the retained humidiy because its high composition in resins and polymers.

Clean up

With plenty of cleant water while the product is wet. Once it hadens only can be removed by mechanical means.

Performance Flexible layer with high adherence for levelling of surfaces.

From 3 to 5 kg per sqm

Storage Flexible layer with high adherence for levelling of surfaces.

6 months in the original packages, protected from the weather and stored in cool and dry places.

Documentation Flexible layer with high adherence for levelling of surfaces.

Productos relacionadas

LASTOIS CAPA INTERMEDIA, BASE LAYER ELASTOMERIC WATERPROOFING AGENT OF LASTOIS SYSTEM.

LASTOIS CAPA INTERMEDIA

BASE LAYER ELASTOMERIC WATERPROOFING AGENT OF LASTOIS SYSTEM.

COMPRARMÁS INFO
LASTOIS FH-CV, ELASTOMER RESIN BASED WATERPROOFING COVERING

LASTOIS FH-CV

ELASTOMER RESIN BASED WATERPROOFING COVERING

COMPRARMÁS INFO
LASTOIS TRANSLUCIDO,

LASTOIS TRANSLUCIDO

MÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.