Industrial paint based on acrylic polyurethane resins

PAVIAIS A.C.

¡Compártelo o guárdalo!

PAVIAIS A.C. , INDUSTRIAL PAINT BASED ON ACRYLIC POLYURETHANE RESINS

PAVIAIS A.C.

INDUSTRIAL PAINT BASED ON ACRYLIC POLYURETHANE RESINS

Description Industrial paint based on acrylic polyurethane resins, PAVIAIS A.C. ?

This product is based on two-component polyeuretane resins mixing in the right moment of using in the following proportion: 1A :2B (weight). Concrete pavements hardener and anti-dust treatment. It can be used indoor (it can be used outdoor but may turns yellow). On industrial building pavements, sport courts, laboratories, hospital rooms, informatic rooms, warehouses, etc. Colours available: White, grey, black, red, green. Ask prices for other colours.

Aplication Industrial paint based on acrylic polyurethane resins?

In the protection and decoration of concrete or mortar pavements in various applications such as;
-Industrial warehouses
-Sports courts
-Labs
-Hospital wards
-Computing rooms
-Exhibition centers
-Warehouses, food industries, etc.

Features and Benefits de PAVIAIS A.C. , Industrial paint based on acrylic polyurethane resins

  •   VERY GOOD MECHANICAL AND CHEMICAL RESISTANCES
  •   VERY LONG DURATION
  •   EASY TO APPLY
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface should well set, dry, smooth, clean and free from grease, dust and loose particles, without cracks or chipping, appearing compact and firm. Otherwise proceed to make repairs oportunas.La forged surface should be fine, dry, smooth, smooth, clean and free from grease, dust and loose particles, without cracking or chipping, appearing compact and firm. Otherwise proceed to make timely repairs.

Modes of application Industrial paint based on acrylic polyurethane resins?

 Homogenizing by different side the content from their containers. -Mixing the two-component in the next proportion: "A" component: 1 part on weight. "B" component: 2 parts on weight. -Mixture is done manually or with a low-revolution electric mixer (300-500 rpm). -If the support is porous a hand of primer can be applied to regularize the absorption with IMPRIDUR.
 Once the primer is dryed and the components are mixed properly the maximum time to apply is 30 minutes.
 The first hand can be diluted in 50% proportion replacing the primer. -The application must be done by roll, brush or spray pistol. -Generally two hand are applied allowing 12 hours between coats. -Concrete surfaces must be prepared with mechanical means by shotting peening, sanding or scarified, with the objective of removing the laitance and obteining a slightly textured surface and with the pores open. -All the defects of the support like the possible loose parts will be removed, cleaned, and will be replacing with suitable mortars before the coating application. (The repairs can be done with DUREPOX AUTONIVELANTE or with THIXOTROPIC DUREPOX because no long cured time are not required in order to apply the coating). -Mortars and concretes must have 28 days of curation at list. -Concretes beside the ground without vapour barrieres can have humidity can generate coating paint blistering, i that cases is recommended considering the application of a DUREPOX AUTONIVELANTE coating as a barriere.

Clean up

With our solvent DISOLAIS while the product is fresh, once hardened it can only be removed by mechanical means.

Performance Industrial paint based on acrylic polyurethane resins

3 sqm per kg applying in two times.

Storage Industrial paint based on acrylic polyurethane resins

1 year, in their original packagings and properly closed, away from heat and protected from the elements, stored in a cool, dry place.

Documentation Industrial paint based on acrylic polyurethane resins

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.