Self-levelling epoxi continuous resin pavements

DUREPOX AUTONIVELANTE

¡Compártelo o guárdalo!

DUREPOX AUTONIVELANTE , SELF-LEVELLING EPOXI CONTINUOUS RESIN PAVEMENTS

DUREPOX AUTONIVELANTE

SELF-LEVELLING EPOXI CONTINUOUS RESIN PAVEMENTS

COMPRAR Ficha Técnica

Description Self-levelling epoxi continuous resin pavements, DUREPOX AUTONIVELANTE ?

Three-component epoxy mortar repairs flooring special. Well suited for the touch pavements, steps, ramps, loading areas, industrial areas requiring high strength and speed of placement.

Aplication Self-levelling epoxi continuous resin pavements?

Durepox Autonivelante is highly suitable to repair industrial floor, rungs, charge and discharge area, docks, floors that a high resistance and a very good duration are required. As a temporally wall against the humidity before the application of coverings in floors that do not have a vapour barrier and they are into the ground. As a levelling layer to the application of resins floors, vinyl or wood floors due to its fast commissioning.

Features and Benefits de DUREPOX AUTONIVELANTE , Self-levelling epoxi continuous resin pavements

  •   VERY GOOD MECHANICAL STRENGTH
  •   FAST COMMISSIONING
  •   EASY TO APPLY
  •   HIGH DURATION
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The surface in which it is applied must be clean, dry (or with resection moisture), free of powder and loose particles, and solid. Confined applications will have straight edges made with a mechanical cut

Modes of application Self-levelling epoxi continuous resin pavements?

  Mix each component separately. - In a large container, mix component A with component B - Then, add slowly the component C, stirring to mix well. - The mix can be made manually or mechanically, with a low-speed blender (300 to 500 rmp) equipped with a helicoidally pallet. - The workability can be adapted with a small change in the component’s C quantity. - Water cannot be added to the mix. - The concrete areas should be prepared mechanically, such as sanding, shot-blasting or milling, to eliminate the superficial grout and to get a surface with open pores. - All the weak parts, with a low resistance, must be eliminated and to be replaced with repair mortars or grouting mortars. - Should not be put on with temperatures under 10ºC or with more than 30ºC - It should be coated with resins after 24h of its application. - It has high adherence in fresh or hardened concrete. - It can be used indoors or outdoors. - It can be used as a temporary moisture barrier.

Clean up

The tools must be cleaned with plenty of water before the materials are dry. If the materials are dry, it can be only retired by using mechanical.

Performance Self-levelling epoxi continuous resin pavements

1,8 kg/lt

Storage Self-levelling epoxi continuous resin pavements

A year in the original containers, well closed, a moderate temperature and protected from the weather.

Documentation Self-levelling epoxi continuous resin pavements

Productos relacionadas

DUREPOX TIXOTRÓPICO, EPOXY CEMENTITIOUS MORTAR FOR REPAIRS

DUREPOX TIXOTRÓPICO

EPOXY CEMENTITIOUS MORTAR FOR REPAIRS

COMPRARMÁS INFO
PAVITAIS BASICO, Epoxy resin to make floors.

PAVITAIS BASICO

Epoxy resin to make floors.

COMPRARMÁS INFO
PAVITAIS PI, SPECIAL EPOXY RESIN FOR CONTINUOUS FLOORINGS

PAVITAIS PI

SPECIAL EPOXY RESIN FOR CONTINUOUS FLOORINGS

COMPRARMÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.