Continuous industrial flooring.

DUROAIS CAPA CONTINUA

¡Compártelo o guárdalo!

DUROAIS CAPA CONTINUA , CONTINUOUS INDUSTRIAL FLOORING.

DUROAIS CAPA CONTINUA

CONTINUOUS INDUSTRIAL FLOORING.

Ficha Técnica

Description Continuous industrial flooring., DUROAIS CAPA CONTINUA ?

Powder product of two-component. DUROAIS CAPA CONTINUA component A and DUROAIS CAPA CONTINUA component B which are mixed and applied as continuous flooring until 5 mm of thickness. Excellent as continuous flooring with high adherence to the weather and abrasion. Just in the moment when it becomes crossable is recommended to spray a thin coat of LACURIS to avoid chalking. Once it is cured can be painted with paints for floors. Grey colour.

Aplication Continuous industrial flooring.?

DURAIS CAPA CONTINUA is used to regularise sufaces ( provided that the differences are not bigger than 5 mm) on floorings for garages, parkings, petrol-stations, etc

Features and Benefits de DUROAIS CAPA CONTINUA , Continuous industrial flooring.

  •   EASE OF APPLYING
  •   SELF-LEVELLING
  •   HIGH MECHANICAL RESISTANCE
  •   HIGH RESISTANCE TO THE WEATHER
  •   HIGH RESISTANCE TO ABRASION
  •   HIGH ADHERENCE WITH THE SUPPORT WITHOUT BONDING-AGENT

¡Compártelo o guárdalo!

Surface preparation

The surface which DUROAIS CAPA CONTINUA is applied on must be clean, free of dust, greases, oils, salts or substances that decrease the adherence, open pore and slightly moistened with hot weather.

Modes of application Continuous industrial flooring.?

 DUROAIS CAPA CONTINUA is formed by one powder component and one liquid component. - Pour the liquid component ( A comp) in a suitable container and add it slowly to powder component ( B comp) stiring with a low speed mechanical mixer (300-500 rpm). - The proportion on the admixture is 6 litres of DUROAIS CAPA CONTINUA A comp per 25 kg of DUROAIS CAPA CONTINUA B comp. - The product is applied by pouring, spreading it with toothed trowel. The thickness of layer will be between 3 and 5 mm. The base can´t have irregularities bigger than 3 mm. - The existing joints must be conserved on the load-bearing base. - Concrete on base must be prepaired preferibly by mechanical means, milling, shot blasting, sanding, to open pores and remove the polishing superficial layer or with mechanical damages. - The concrete with bad adherence or damaged must be removed and all the defects such as pothole must be repaired before applying DUROAIS CAPA CONTINUA. The potholes can be repaired with DUROAIS PARCHEO. - DUROAIS CAPA CONTINUA must be spread by a toothed trowel (triangular theeth). A spiked roller can be used during the mixing in order to driven it out the trapped air. Don´t apply when the product begins to loose self-levelness because it can produces a texture. - Once it is setting spray a thin layer of LACURIS to improve curing.

Clean up

With plenty of clean water while the product is wet. Once it hardens only can be removed by mechanical means.

Performance Continuous industrial flooring.

4,5 kg per sqm in layer of 3mm

Storage Continuous industrial flooring.

2 years in their original packages, tightly closed, protected from the weather and stored in a cool and dry place.

Documentation Continuous industrial flooring.

Productos relacionadas

AGLOMERADO ASFALTICO,

AGLOMERADO ASFALTICO

MÁS INFO
DUROAIS PARCHEO, PRODUCT TO PATCHING UP ON INDUSTRIAL FLOORINGS.

DUROAIS PARCHEO

PRODUCT TO PATCHING UP ON INDUSTRIAL FLOORINGS.

COMPRARMÁS INFO
RESIMPRES RENOVACION,

RESIMPRES RENOVACION

COMPRARMÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.