Predosed stamp concrete for pavements on thin layer

DURIMPRES REHABILITACION

¡Compártelo o guárdalo!

DURIMPRES REHABILITACION , PREDOSED STAMP CONCRETE FOR PAVEMENTS ON THIN LAYER

DURIMPRES REHABILITACION

PREDOSED STAMP CONCRETE FOR PAVEMENTS ON THIN LAYER

Ficha Técnica

Description Predosed stamp concrete for pavements on thin layer, DURIMPRES REHABILITACION ?

Predosed mortar and special colored printed flooring conducting thin layer (15 to 20 mm). Price for gray check price for other colors.

Aplication Predosed stamp concrete for pavements on thin layer?

Stamp concrete on thin layers from 1.5 to 2 cm thickness to apply on concrete floors or also on existing stamp concrete that are to be renewed.

Features and Benefits de DURIMPRES REHABILITACION , Predosed stamp concrete for pavements on thin layer

  •   EASY TO APPLY
  •   VERY GOOD AESTHETIC PROPERTIES
  •   GOOD MECHANICAL STRENGTH
  •   HIGH ADHESION

¡Compártelo o guárdalo!

Surface preparation

The surface must be clean, dry and free of dust or loose parts. No remains of resins or protection liquids. It does not require an adhesion bridge on absorbent holders.

Modes of application Predosed stamp concrete for pavements on thin layer?

  Rehabilitation Durimpres has to be kneaded with 18% of water until getting a homogeneous and paste consistency. - The mixing is done with electric mixer on low speed, 300-500 rpm - Extend the material between the guides with a thickness of 1.5 or 2 cm depending on the type of rubber mould used. - Work the surface to get it smooth. - Spread the release agent, DESPOL to prevent the mould to be stick on the mortar. - Place the mould and press for printing. - Once the application is done allowed it to dry. - Contraction joints can be pre-marked with plastic reeds or be cut the next day when the pavement has the enough resistance to do the proper cutting by machine. - Wash it with water under pressure to remove the remains of DESPOL. - Once it is dry, protect it with RESIMPRES A OR D. - The product has application and curing times that are closely related to temperature, not be worked with temperatures below 5 ° C or above 30 º C. - Applications should not occur in areas with strong drafts or wind. -In heating time usually procedures of cured using chemical curators, plastic film protection o with continued irrigation since the material becomes hardened.

Clean up

With plentiful water while the material is fresh, once hardened can only be removed by mechanical means.

Performance Predosed stamp concrete for pavements on thin layer

20 kg/sqm per each cm of thickness.

Storage Predosed stamp concrete for pavements on thin layer

Two years in their original packagings protected from the weather and stored in a cool and dry place.

Documentation Predosed stamp concrete for pavements on thin layer

Productos relacionadas

ESLURRIS SINTETICO, SYNTHETIC RESIN BASED PAVEMENT

ESLURRIS SINTETICO

SYNTHETIC RESIN BASED PAVEMENT

COMPRARMÁS INFO
PAVIMENTO ARTICULADO,

PAVIMENTO ARTICULADO

MÁS INFO
PAVIS A.L.,

PAVIS A.L.

MÁS INFO
PAVIS C.R.,

PAVIS C.R.

COMPRARMÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.