Traditional lime rendering

REVOGACAL

¡Compártelo o guárdalo!

REVOGACAL , TRADITIONAL LIME RENDERING

REVOGACAL

TRADITIONAL LIME RENDERING

Description Traditional lime rendering, REVOGACAL ?

Traditional lime render for aesthetical finishing on facades. Specially recommended for refurbishment because can be done in the traditional finishing. It is applied by trowel until achieve thickness betwenn 5 and 10 mm. Subsequently the desired finishing must be done. White colour. Other colours under order.

Aplication Traditional lime rendering?

In refurbishment and decoration both indoor and outdoor. As a finishing on high aesthetic facades properly protected with REPAIS where waterproofing is required.

Features and Benefits de REVOGACAL , Traditional lime rendering

  •   HIGH WORKABILITY
  •   HIGH RESISTANCE
  •   VERY GOOD AESTHETIC APPEARANCE
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The support must be resistant and stable, free of oils, fungi, paint, dust, etc... and being slightly wet before the application of REVOGACAL. Supports must be porous.

Modes of application Traditional lime rendering?

  The product must be mixed with a 20+/-2% of water on weight. Let it stand for 10 minutes before applying.
  Spread the lime mortar on the wall (being it slightly wet) by trowel until achieve a thickness from 5 to 10 mm according the type of finishing to do.
  Subsequently the regulation of the surface must be done and after finishing by differents techniques.
  Don´t apply with temperatures below 5ºC and over 35ºC.
  If the weather is hot the plastering must be wet 24 later after been applied.

Clean up

With plenty clear water while the material is still wet. After it hardens only can be removed by mechanical means.

Performance Traditional lime rendering

1,2 kg per sqm in thickess of 1 mm.

Storage Traditional lime rendering

2 years in their original packages tightly closed stored in cool and fresh place.

Documentation Traditional lime rendering

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.