Joint sealer for tile and ceramic tile

REJUNTAIS

¡Compártelo o guárdalo!

REJUNTAIS , JOINT SEALER FOR TILE AND CERAMIC TILE

REJUNTAIS

JOINT SEALER FOR TILE AND CERAMIC TILE

COMPRAR Ficha Técnica

Description Joint sealer for tile and ceramic tile, REJUNTAIS ?

Powder product which amassed with water becomes and a suitable product for sealing joints of tiles, stone slabs, glass slabs, etc. It´s a very good option for decorative sealing of open and close joints of stone slabs, terraces, tiles, etc. THIN TYPE is used for joints until 5mm thickness while THICK TYPE is used for thickness of more than 5 mm. The prices deppending on the colours and quantities.

Aplication Joint sealer for tile and ceramic tile?

Rejuntais is used for sealing joints on floor and wall coverings, in indoors or outdoors, in bathrooms, kitchens, swimming pools, pavements in general, for its excellent glossy appearance is very suitable for coatings onto coatings based on porcelain tiles, marble , granite, or any material that requires high functional and esthetic quality groutings .
With additives to prevent mold growth.

Features and Benefits de REJUNTAIS , Joint sealer for tile and ceramic tile

  •   WATERPROOF PROPERTIES
  •   VERY GOOD ADHESION
  •  SHRINK PROOF
  •   HIGH COLOR STABILITY
  •   GOOD MECHANICAL STRENGTH
  •   INDOORS & OUTDOORS
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The joints must be clean and free of material across its length and depth. Ceramics should be protected during application. To apply the grouting, the bonding must have at least 24 hours in walls and 48 floors.

Modes of application Joint sealer for tile and ceramic tile?

  Mix with water in a clean container until obtaining a pasty mass. -Mechanical mixture is done with a low-revolution electric mixer: 300-500 rpm. - Let it stand for 3-5 minutes before applying.
  Apply with the aid of a spatula or a grouting gun(APLIJUN). - The material must be well compacted into the joints.. - The application must be done perpendicular to the joints pressing the grout and removing the remaining material. - It is cleaned with a hard and slightly wet sponge after the time-work is more than 20- and less than 30 minutes in order to the material becomes too much hardness. - The final cleaning once the material has hardened it can be done with our cleaning products COAIS (a test should be done in a small surface to be sure that spots doesnt appear). -
  When placing glass windows, mix with AGLUTAIS 50. - REJUNTAIS F is used for joints of maximum 5 mm wide, and REJUNTAIS G for 5 - 10 mm wide.
 REJUNTAIS F is used for joints of 5mm wide maximum and REJUNTAIS G is used for joints thicker than 5mm.

Clean up

With plentiful clean water while the mortar is fresh. After hardening can only be removed mechanically.

Performance Joint sealer for tile and ceramic tile

F: 0,65 kg/m2, and 5 mm; G: 1,3 kg/m2, and 10 mm.

Storage Joint sealer for tile and ceramic tile

2 years, in their original packagings, properly closed and protected from the weather, stored in cool and dry place areas.

Documentation Joint sealer for tile and ceramic tile

Productos relacionadas

MORPI BASE CAL, MORTAR USED FOR LAYING AND GROUTING PURPOSES

MORPI BASE CAL

MORTAR USED FOR LAYING AND GROUTING PURPOSES

COMPRARMÁS INFO
MORPI BASE CEMENTO, CEMENT-BASE MORTAR FOR PLACING AND GROUTING.

MORPI BASE CEMENTO

CEMENT-BASE MORTAR FOR PLACING AND GROUTING.

MÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.