Bi-component thixotropic adhesive based on epoxy resins

EPOAIS H

¡Compártelo o guárdalo!

EPOAIS H , BI-COMPONENT THIXOTROPIC ADHESIVE BASED ON EPOXY RESINS

EPOAIS H

BI-COMPONENT THIXOTROPIC ADHESIVE BASED ON EPOXY RESINS

Description Bi-component thixotropic adhesive based on epoxy resins, EPOAIS H ?

Two-component epoxy adhesive which provides high mechanical strength. It is an appropriate adhesive for anchors, joints between materials of the same or different type, etc.. In this case mold is not required since the mixture is thixotropic. It is gray. Also ideal for curing concrete bodies join together or to metal surfaces.

Aplication Bi-component thixotropic adhesive based on epoxy resins?

Epoais H is used for bonding cured concrete parts together. Union of metal, marble, natural or synthetic stonel, and similar choices. In anchoring of iron, flange plates, to fill cracks. As repair mortar for small surfaces such as edges or ridges, holes or voids, repair joints and cracks edges.

Features and Benefits de EPOAIS H , Bi-component thixotropic adhesive based on epoxy resins

  •   EASY TO APPLY
  •   HIGH ADHESION TO MOST BULDING MATERIALS
  •   LIQUID-PROOF AND VAPOR-PROOF
  •   HIGH RESISTANCE TO CHEMICAL ATTACKS
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Remove greases, oxides, residues of release agents, dust, being thoroughly cleaned surfaces. For proper adhesion bonding surfaces must be solid, uniform, compact and well dried.

Modes of application Bi-component thixotropic adhesive based on epoxy resins?

  Mix the content thoroughly manually until a homogeneous blend is obtained. - Next, pour the whole amount of component B into component A. When not using the entire amount, follow the indicated mixing proportions in weight (6A:1B). - Mix manually or with a low speed electric mixer (400-500 rpm). - EPOAIS H must be applied immediately once mixed within an open time of 10-20 minutes according to room temperature.
  Apply in 1-3 mm thick layer with a trowel or spatula onto one of the surfaces before joining.
  Then join both pieces together. - The required chemical and mechanical resistance of the adhesive is effective after 7 days. -Epoais H is easy to mix and apply, it is suitable for dry or slightly damp substrates, has very good adhesion on most building support, hardens without shrinkage, does not need primer, it has good chemical resistance and is impervious to liquids and water vapor.

Clean up

With DISOLVENT EPOXI, immediately after using. Once dry it can only be removed by mechanical means.

Performance Bi-component thixotropic adhesive based on epoxy resins

2 kg per sqm in concrete pieces union

Storage Bi-component thixotropic adhesive based on epoxy resins

1 year, in their original packagings, properly closed, without exposing to extreme temperatures, protected from the weather and in dry and ventilated places.

Documentation Bi-component thixotropic adhesive based on epoxy resins

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.