Plasticizer for concrete and mortar

PLAIS N

¡Compártelo o guárdalo!

PLAIS N, PLASTICIZER FOR CONCRETE AND MORTAR

PLAIS N

PLASTICIZER FOR CONCRETE AND MORTAR

OTRAS VARIANTES DE PLAIS :

S

Description Plasticizer for concrete and mortar, PLAIS N?

Aerating additive for making mortars more workable. PLAIS added to the mixing water provides a wide plasticity to mortar and concrete, increasing its manageability by allowing reduced water mixing. Dosages:            Normal: 1 l. / 2500 kg of cement.            Super: is diluted with water in 1:3 ratio, using 20 cc of dilution per sack of cement. 1 l / 10,000 kg of cement.

Aplication Plasticizer for concrete and mortar?

Plais N is used when it's necessary to improve the workability of mortar and concrete, to slightly reduce the water/cement ratio, to achieve a better finish of the molded parts, to increase mechanical strength. Cohesion increases avoiding segregation ,increases the hardened mortar's resistance to frost. Does not change the setting and hardening times.

Features and Benefits de PLAIS N, Plasticizer for concrete and mortar

  •   EASES WORK COMMISSIONING
  •   IMPROVES WORKABILITY
  •   IMPROVES PROPERTIES OF FRESH AND HARDENED MIXTURE
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

Not applicable.

Modes of application Plasticizer for concrete and mortar?

  Mix the package contents for the correct homogenization of the product. -Plais N is added to the mixing water in the ratio of 1L per 2,500 kg. Of cement.
  It is recommended to add 10 cm3 of PLAIS N to mixing water for every 25 kg of cement. - It thus enables to reduce the A/C ratio so as to obtain an improved finish for moulded pieces by increasing their mechanical resistance.

Clean up

With plentiful clean water

Performance Plasticizer for concrete and mortar

According to use

Storage Plasticizer for concrete and mortar

During 3 years in their original packagings, properly closed in a dry and cool area, and at temperatures above 4 ° C.

Documentation Plasticizer for concrete and mortar

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.