Fast setting-time adhesive for placing bricks, tiles and ceramics

CECOIS FRAGUADO RAPIDO

¡Compártelo o guárdalo!

CECOIS FRAGUADO RAPIDO , FAST SETTING-TIME ADHESIVE FOR PLACING BRICKS, TILES AND CERAMICS

CECOIS FRAGUADO RAPIDO

FAST SETTING-TIME ADHESIVE FOR PLACING BRICKS, TILES AND CERAMICS

Description Fast setting-time adhesive for placing bricks, tiles and ceramics, CECOIS FRAGUADO RAPIDO ?

Cement-based adhesive of fast setting time that mixed with water just in the moment of applying is used for placing ceramic tile, ceramics, tiles, etc. It can be used for indoors and outdoors. Setting time from 1 to 3 hours for temperatures higher than 20ºC.

Aplication Fast setting-time adhesive for placing bricks, tiles and ceramics?

CECOIS FRAGUADO RÁPIDO is suitable to placing bricks, tiles, ceramics, marble, glazed, etc in kitchens, bathrooms, toilets, laboratories, hospitals, etc. Placement of tiles and slate and sloped roofs. Both indoors and outdoors.

Features and Benefits de CECOIS FRAGUADO RAPIDO , Fast setting-time adhesive for placing bricks, tiles and ceramics

  •  HIGHLY ADHERENCE
  •   HIGHLY THIXOTROPI
  •   EASE OF PLACING
  •   GREAT WORKABILITY
  •   SUITABLE FOR OUTDOORS AND INDOORS

¡Compártelo o guárdalo!

Surface preparation

The support surface where the adhesive is applied must be cleaned, out of grease and oils, compact, with no fleking and slightly moistened.

Modes of application Fast setting-time adhesive for placing bricks, tiles and ceramics?

 CECOIS FRAGUADO RAPIDO is mixed directly with water in the recommended proportion until obtain the desired consistency. -The mix can be done manually or with low revolution electric mixer (from 400 to 500 rpm). -The suitable mix is 7 litres of water per CECOIS FRAGUADO RÁPIDO 25 kgs sack. -It can be walked on after 1 and 3 hours according the temparature. -The time of setting is 8 hours. -CECOIS FRAGUADO RÁPIDO must be applied by a toothed trowel, applying as quantity as that the opening time(10 minutes approximately according the temperature). At a higher temperature less open time. -Placing the pieces pressing them ir order to achieve that the adhesive becomes smoothed to cover all the surface with adhesive. -With hot weather and when the support is highly absorbent moisten it slightly is recommendable. -For pieces placing outdoors joints must be provided according the pieces´ coefficient expansion. -The setting time is from 1 to 4 hours for temperatures higher than 20º.

Clean up

With plenty of clean water while the material is wet.

Performance Fast setting-time adhesive for placing bricks, tiles and ceramics

3 kg per sqm in 2 mm layer

Storage Fast setting-time adhesive for placing bricks, tiles and ceramics

2 years in their original packages tightly closed avoiding the exposure to high temperature, protected from the weather and in dry and cool places.

Documentation Fast setting-time adhesive for placing bricks, tiles and ceramics

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.