Elastic waterproofing with special fibers incorporated

LASTOIS FIBRO

¡Compártelo o guárdalo!

LASTOIS FIBRO , ELASTIC WATERPROOFING WITH SPECIAL FIBERS INCORPORATED

LASTOIS FIBRO

ELASTIC WATERPROOFING WITH SPECIAL FIBERS INCORPORATED

Description Elastic waterproofing with special fibers incorporated, LASTOIS FIBRO ?

Elastic cladding with thixotropic consistence based on acrylic styrene copolymers and with fiberglass that once dry forma a flexible coating, waterproofing and that works for a long time. Available in brick-colour, grey and white.

Aplication Elastic waterproofing with special fibers incorporated?

LASTOIS FIBRO is used for waterproofing decks with a low visitor transit. It can be applied on various substrates such as mortar, concrete, tiles, bricks, wood, aluminum, zinc, cement, polyurethane foam, tiles, asphalt sheets with aluminum or slate termination, dividing walls, roofs and singular points, etc.

Features and Benefits de LASTOIS FIBRO , Elastic waterproofing with special fibers incorporated

  •   WATERPROOF
  •   ELASTIC
  •   HIGH ADHESION TO VARIOUS SUBSTRATES
  •   DURABILITY
  •   ACCOMPANYING EXPANSION AND CONTRACTION MOVEMENTS OF THE SUPPORT
  •   EASY APPLICATION
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The background must be dry and no trace of contaminating particles, or any other material which may impair adhesion of the material.

Modes of application Elastic waterproofing with special fibers incorporated?

  Homogenize properly the product before its application - Apply the first coat diluted with 15 to 20% of water - Once the first coat dry, apply two or three more to complete the consumption of 2 kg/m2, letting each coat to dry well before applying the next one. - It is applied by brush or short nap roller. - LASTOIS FIBRO is not suitable to be in permanent contact with water. - LASTOIS FIBRO should be applied on clean and dry substrates with adequate curing time in the case of mortars or concretes; it can be apply over bituminous membranes covered with aluminum sheets or mineral grain. - Do not apply in rain forecast or with temperatures below 5 ºC or above 30 ºC. - Drying time between layers is about 3 to 5 hours (at 20 ºC)

Clean up

Tools are cleaned with water while the material is fresh, when hardened / cured material can only be removed mechanically.

Performance Elastic waterproofing with special fibers incorporated

2 kg/m2

Storage Elastic waterproofing with special fibers incorporated

Two years in their original tightly closed container, stored in cool and dry place.

Documentation Elastic waterproofing with special fibers incorporated

Productos relacionadas

MÁXIMA CALIDAD.
En materias primas
y construcción.
FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.