Cement based waterproofing powder

CEPIS STANDARD

¡Compártelo o guárdalo!

CEPIS STANDARD, CEMENT BASED WATERPROOFING POWDER

CEPIS STANDARD

CEMENT BASED WATERPROOFING POWDER

COMPRAR Ficha Técnica

OTRAS VARIANTES DE CEPIS :

SUPER

Description Cement based waterproofing powder , CEPIS STANDARD?

Cement based powder product to be mixed with water forms a corrugated paint that is waterproofing and shows good hardness. It is used on irregular supports in which make them uniform, mainly walls made of concrete blocks and also as paint o before finishing with another paint. Waterproofing resistance and elasticity are improved upon mixing with AGLUTAIS 30-50.

Aplication Cement based waterproofing powder ?

It must be preferentially applied onto concrete supports. In foundations, for protecting concrete submitted to aggressive water attack, as uniform paint for walls, blocks or similar structures, for waterproofing in silos, facades, basements, pipes, tunnels, galleries, dams, swimming pools, reservoirs, etc.

Features and Benefits de CEPIS STANDARD, Cement based waterproofing powder

  •  EXCELLENT WATERPROOFING.ENHANCED ADHERENCE.HIGH MECHANICAL RESISTANCE.
 COMPRAR

¡Compártelo o guárdalo!

Surface preparation

The support of application must be solid, clean, free of efflorescence, lubricant, grease, paints, plaster, dust and cracks. It should also be damp and cannot be in contact with metallic elements.

Modes of application Cement based waterproofing powder ?

  Use a clean container to add CEPIS(20 kg) and water(5.5 lt) and mix until obtaining a thick creamy mix, leaving to stand for 5 minutes. Stir again and then apply the whole mix within 30 minutes. The support must be damp but not soaking so as to prevent premature drying.
  Apply with a paint brush in three coatings, preferably in a different colour, or use a trowel so as to reach 3 to 5 mm thick coating.
  For improved resistance and waterproofing, when not soaking in water, it can be mixed with AGLUTAIS and water previously in the proportion of 1 litre of AGLUTAIS to 5 litres of water for every 20 kg of CEPIS.

Clean up

Clean using large amounts of water.

Performance Cement based waterproofing powder

2 to 4 kg/m2 according to application.

Storage Cement based waterproofing powder

It is recommended to store this product for 2 years in tightly closed original packages.

Documentation Cement based waterproofing powder

Productos relacionadas

CEPIS GUNITADO, POWDER PAINT BASED ON CEMENT FOR APPLICATION BY JETTING.

CEPIS GUNITADO

POWDER PAINT BASED ON CEMENT FOR APPLICATION BY JETTING.

COMPRARMÁS INFO
TEAIS IMPERCEM, ELASTIC TWO-COMPONENT CEMENTITIOUS MORTAR FOR WATERPROOFING

TEAIS IMPERCEM

ELASTIC TWO-COMPONENT CEMENTITIOUS MORTAR FOR WATERPROOFING

COMPRARMÁS INFO
+34 981 602 111
¿Tienes dudas?
Llámanos
MÁXIMA CALIDAD.
En materias primas
y construcción.
logo de teais, empresa de materiales de construcción
Avda. da Enerxía, nº 153, Pol. Ind. de Sabón
15143 Arteixo,A Coruña
Phone.: 981 602 111
Fax.: 981 601 508
Email.: desarrollo@teais.es

síguenos en:

Política de cookies | Aviso Legal | Política de privacidad

FEDER INNTERCONECTA

2015-2017 SHIAC (ITC-20151250): DESARROLLO DE TECNOLOGÍAS DE HIGIENIZACIÓN PARA LA REDUCCIÓN DE RIESGOS BIOLÓGICOS EN ACUICULTURA
El proyecto SHIAC tiene como objetivo principal la investigación y desarrollo de una estrategia integral que permita reducir el riesgo biológico en acuicultura, integrando diferentes medidas tanto de tipo activo como pasivo para la prevención de patologías con una gran incidencia económica en el sector, y aportando soluciones más sostenibles ambientalmente a las actualmente empleadas en acuicultura.
Grupo Tres Mares S.A actúa como socio representante del consorcio empresarial que ejecuta este proyecto el cual ha sido aprobado y subvencionado por CDTI en el marco de la convocatoria FEDER INNTERCONECTA 2015.